Our bathrooms are one of the most used rooms in our house and somewhere you want to keep fresh and hygienic for you and your loved ones. If you are looking to upgrade your shower this year, fitting wet wall panels is a great idea to enhance the appearance of the room and bathroom fittings. Today we’re going to share our complete guide to bathroom wall panels and how to fit wet wall shower panels to transform the look of this room. Our team will be here to support you with this project, so don’t hesitate to contact us today for support.
Benefits of Wet Wall Shower Panels
When you start to look at the question of what is the best shower wall panels, you’ll notice that there are many great benefits to adding wet wall shower panels to your bathroom. Compared to traditional tiling, these bathroom fittings near me are more waterproof and durable. They are designed to withstand constant exposure to water, which will help prevent leaks and make them highly resistant to mould and mildew. For anyone looking for a quick upgrade to their bathroom fittings, they are quick and easy to install. Unlike tiles, which require extra time for grouting and sealing, wet wall panels can be installed rapidly, reducing the overall time needed to renovate your bathroom.
We are all looking for ways to make looking after our lives simpler, and that includes reducing the time needed to clean and maintain our homes. Wet wall shower panels are low maintenance, as with no grout lines to clean, cleaning a wet wall panel is much easier than keeping tiles spotless. You’ll find a variety of options to choose from to match any bathroom design. Available in a variety of colours, patterns, and finishes, these panels can mimic the appearance of tiles, marble, or other materials, giving you plenty of design ideas and flexibility. Finally, over time, they can be a great value-for-money investment. Although the upfront cost might be similar to tiling, the reduced installation time and low maintenance costs make wet wall panels a more cost-effective choice in the long run.
Tools and Materials Required to Fit Wet Wall Shower Panels
Before starting the installation process, ensure you have the following tools and materials ready to use:
- Wet wall shower panels
- Panel adhesive
- Silicone sealant
- Measuring tape
- Spirit level
- Masking tape
- Jigsaw or fine-tooth saw
- Drill and screws (if required)
- Panel trims
Preparation to Fit Wet Wall Shower Panels
Proper preparation is crucial to ensure a successful installation process. Start by measuring the dimensions of your shower area. This will help you decide the number of panels required and whether any trimming is necessary. You can then move on to preparing the walls for the installation process. Ensure the walls are clean, dry, and free of dust or grease. Any old tiles should be removed, or alternatively, the panels can be fitted directly onto tiled surfaces. You’ll want to cut the panels you have to size using a jigsaw or fine-tooth saw and carefully cut the panels to fit your shower area. You’ll then be ready to start the installation process.
Wet Wall Shower Panel Installation Guide
To start the installation process, you’ll want to attach any required panel trims to the corners and edges of the shower area. From there, you can apply the waterproof adhesive to the back of the first panel using a notched trowel or directly from the tube. Make sure you spread the adhesive evenly over the wall panel so that it grips the wall properly. Carefully align the first panel with the wall, starting from one corner. Use a spirit level to ensure it is straight, then press the panel firmly into place. We recommend that you use masking tape to temporarily secure panels into place while the adhesive sets. Repeat this process over and again until all of the panels are in place.
Use silicone sealant along the edges to create a watertight seal that will ensure your tiles are an addition to your bathroom that you can enjoy for years to come. Once all panels are in place, trim any excess material using a sharp knife or saw. For a more polished finish, you might want to consider fitting end caps to exposed edges. To finish off the project, seal the edges with silicone sealant and use a sealing tool to give it a polished finish. Let the adhesive and sealant cure according to the manufacturer’s instructions, which will usually be 24 to 48 hours.
Fitting wet wall shower panels is a rewarding project that you can either undertake alone or with the help of our team. Contact us today for more information about adding wet wall shower panels to your bathroom or to discuss any questions you have about the services we offer.