Water pressure can be a pain. There’s nothing worse than hopping in the shower in a mad dash to get ready for work, only to be greeted by the pitiful trickles of a low-pressure shower. We understand the frustration of standing, dry towel in hand, in your bathroom, not sure where to turn to solve this annoying inconvenience
The everyday person doesn’t know where to start when it comes to solving a water pressure issue, which means that your pre-work shower, unfortunately, has to go amiss on that day your water pressure decides to play up. With our help and this blog post, you’ll be equipped to tackle the water pressure problems in your home. This blog post will teach you how to improve water pressure, how to turn up your water pressure, and what signs you need to look for to know if you have a water pressure-related problem.
After this post, you’ll know how to make sure you and your plumbing systems are squeaky clean and ready for the day ahead.
The first step towards fixing your water pressure problem is to ask around. Knock on your neighbour’s doors and politely ask them if they’re encountering the same problems you are. Knowing if water pressure problems are affecting your neighbours too will help you narrow down the source of the problem. If you share a joint water supply, the pressure problem might be rooted here or even be a city-wide issue.
If your neighbours aren’t encountering the same problems, your water pressure issues are to do with your house’s pipes, a potential leak, a blockage, or the water valve.
Test With A Gauge
The next step to take is testing your water pressure with a gauge. Screw the pressure gauge onto a tap and make sure all other water-using appliances aren’t in use. If your pressure reading is around 50psi, your water pressure is perfectly fine. If the gauge reads below 40 psi, this is low, and above 80psi is considered high. It’s more likely that you’ll encounter problems with increasing water pressure, rather than decreasing it.
Check The Valve
The water pressure level might be being affected by the water valve. The water valve in your house should be next to the water meter. This valve is what lets running water flow into your property. Sometimes, the valve can become knocked out of place. Adjust the valve accordingly to make sure it is open and allows running water to flow through.
If your valve is open, you might be encountering a problem with blocked pipes. Over time, with extensive use, limescale can build up inside the pipes. This limescale might be what’s stopping flowing water running through the pipes and to the tapes. De-limescale your pipes with a plumber-recommended limescale remover, or use household vinegar to dissolve the mineral deposit.
If you’re experiencing a blocked sink problem too, this may also be due to blocked pipes. Clean out your water pipes regularly.
Inspect For Leaks
The water pressure might be down due to water being used elsewhere in the property. Unwanted leaks can use significant amounts of water and drastically reduce water pressure as a result. To see if you have a water leak, turn off all water-using appliances and check the water valve. If the water valve is still moving despite no appliances being in use, water is leaking elsewhere in the property. Investigate this leak and resolve it as soon as possible. Resolving this leak will improve your water pressure. You will likely need the assistance of a professional plumber to stop the leak.
Replace The Water Regulator
A water regulator directs water from the main supply line to your property. This regulation system is what ensures large quantities of water don’t come gushing into your home. The water regulator regulates water pressure outside the home and directs safe levels of water to your house. Worn out or faulty water regulators can cause too much or too little water to flow into your property. Having a professional plumber replace your regulator will ensure the correct amount of water continuously flows into your property and improve your water pressure as a result.
If you’re searching for an experienced professional plumber to help replace your water regulator system, you can contact Norwich plumbers or visit our website at www.northwichplumbers.co.uk for more information.
Instal A Booster Pump
If your property is in a hard-to-reach area, such as up a hill or in the middle of the country, it can be difficult for a constant water supply to reach you. Boost the water levels entering your home with a booster pump. Rather than waiting for the water to trickle in, give it a helping hand by installing a water pump. Water pumps repressurise the water before entering your home, ensuring a plentiful flow of water reaches your taps.
It’s always a pain when you encounter water pressure problems. Thankfully, there are simple steps you can take to solving the water pressure problems in your home. Once you know the reason you’re having water pressure problems on your property, you can take simple steps to resolve and increase the water pressure in your house yourself, or hire a professional plumber that knows everything there is to know on how to improve water pressure.